+44 (0) 1580 891521


MuCans are normally produced in MuMetal® and typically have wall thicknesses of between 0.5mm and 1mm. Deep drawn products vary in size from less than 10mm round or square to approximately 75mm round or square. We have extensive deep drawing and fabricating facilities to produce both round and square cornered MuCans in quantities from one off to high volume production runs.

Contact our Technical Sales Team for assistance.


Our Service

We are able to trim the height of any can to suit customer requirements, however there are limitations which directly correlate to the base size/diameter of the can. We therefore recommend that you check with Magnetic Shields that your desired height is possible at the design stage.
Magnetic Shields offer a range of standard MuCans which are usually available in small quantities from stock or can be produced in larger quantities to order. If you cannot find your requirements in our standard MuCans range we can produce tooling to form any deep drawn can in MuMetal® or other soft magnetic alloy to order.

Typically for a new tool there is a lead time of approximately 6-8 weeks but normally we can produce hand-made prototypes of a new design in 2-3 weeks to verify the product prior to any tool cost being incurred.

View/Download MuCan Standard Range PDF

Headcorn Road  |  Staplehurst  |  Tonbridge  |  Kent  |  TN12 0DS  |  UK

Tel : +44 (0) 1580 891521  Fax : +44 (0) 1580 893345

® MuMetal is a registered trademark of Carpenter Technology Corporation
® MuRoom is a registered trademark of Magnetic Shields Limited
® Cryophy is a registered trademark of Aperam Alloys